Shower Enclosures in Lido Beach, NY
Glass That Fits Your Space, Not Someone Else's
Hear from Our Customers
Custom Glass Shower Enclosures Lido Beach
Most bathroom renovations stall at the shower. You’ve got new tile, new fixtures—and then a builder-grade door that makes the whole room feel cheap.
A frameless shower enclosure changes that immediately. The glass opens up the space, lets light move through the room, and gives you something that looks intentional. Not an afterthought.
You’re not just covering a gap. You’re finishing what you started. And if the measurements are off or the install is sloppy, none of it matters. That’s where experience counts—knowing how to template around uneven walls, how to handle tricky angles, and how to make sure the door swings smooth and seals tight every time.
Walk into your bathroom and it should feel complete. Not almost done. The right custom shower enclosure does that—it pulls everything together and makes the investment you already made in tile, fixtures, and layout actually pay off visually.
Frameless Shower Doors Lido Beach NY
OMG Shower Doors has been serving Long Island for over 20 years. We’re not new to this. We’ve templated hundreds of bathrooms across Nassau County, including some of the most demanding projects in the Hamptons.
We’re certified with the Better Business Bureau, active members of LIBI and the National Kitchen and Bath Association, and we sponsor local events like the LIBI breast cancer walkathon. We’re part of the community here in Lido Beach, and we show up the way you’d expect a local business to show up—on time, prepared, and accountable.
You’ll get a transparent proposal before we start, clear communication while we’re working, and a finished enclosure that does exactly what it’s supposed to do. We also offer discounts for military members, veterans, and first responders because we believe in taking care of the people who’ve taken care of us.
Shower Door Installation Process Lido Beach
First, we come out to measure. Not you with a tape measure—us. We template the space, check for plumb, and account for anything that might cause issues down the line. Walls are rarely perfect, and we build that into the design.
Next, you’ll get a detailed proposal. No vague estimates. You’ll see exactly what you’re paying for, what glass we’re using, what hardware you’re getting, and when we’ll be back to install.
Once you approve, we fabricate your custom shower enclosure. Then we schedule installation at a time that works for you. Our team shows up, installs everything clean, seals it properly, and walks you through how to maintain it.
The whole process is designed to be efficient and predictable, so you’re not left guessing where things stand. We’ve refined this over two decades of residential glass services across Long Island, and it shows in how smoothly things move from consultation to completion.
Ready to get started?
Custom Shower Doors Lido Beach NY
When we say custom, we mean it. Every enclosure is built for your specific bathroom. That includes the glass thickness, the hardware finish, the door style, and how it mounts to your walls.
In Lido Beach, we see a lot of coastal homes with older construction—uneven walls, non-standard shower pans, tight spaces. A stock enclosure won’t work. You need something that’s measured and fabricated to fit what’s actually there, not what the manufacturer assumes.
We use quality glass that stays clear and resists hard water buildup, which matters here on Long Island where water quality varies. The hardware is solid—hinges that won’t sag, handles that don’t loosen after six months. And frameless designs mean fewer places for soap scum and mildew to hide, which makes your life easier long-term.
Shower glass installation isn’t just about mounting panels to a wall. It’s about understanding how water moves, how doors need to be weighted and balanced, and how to seal everything so you’re not dealing with leaks six months later. That’s the difference between a job that looks good in photos and one that actually functions the way you need it to.
We work with homeowners who are renovating, builders finishing new construction, and contractors who need reliable glass work for their projects. Whatever your situation, the approach is the same—precise measurement, quality materials, and an installation that holds up.
How long does it take to install a custom shower enclosure?
From the time we measure to the time we install, you’re usually looking at one to two weeks. That gives us time to fabricate the glass, order any custom hardware, and schedule a clean installation window.
The actual install day depends on the complexity of your enclosure. A simple frameless door might take a few hours. A full three-panel enclosure with a return and a header could take most of a day. Either way, we’re not rushing it. We’d rather take the time to do it right than leave you with a door that doesn’t close properly or a seal that leaks after the first shower.
If you’re on a tight timeline—maybe you’re finishing a renovation before a closing date—let us know up front. We’ll do what we can to move things along without cutting corners.
What's the difference between frameless and semi-frameless shower doors?
Frameless doors have no metal framing around the glass panels. They’re held in place with minimal hardware—usually just hinges or a mounting channel. The look is clean and modern, and there’s less metal to corrode or collect buildup over time.
Semi-frameless doors have a frame around the perimeter but leave the glass itself exposed. They’re a middle ground—more affordable than fully frameless, but still cleaner-looking than the old-style framed doors with metal tracks everywhere.
Most people in Lido Beach go frameless if their budget allows. It opens up the bathroom visually, makes the space feel bigger, and it’s easier to keep clean. But if you’re working within a tighter budget or you have a specific design in mind, semi-frameless can still look sharp.
Will a frameless shower door leak water onto my bathroom floor?
Not if it’s installed correctly. Frameless doors rely on proper sealing and precise alignment to contain water. That’s why the measurement and installation matter so much.
We use high-quality seals along the bottom and sides of the door, and we make sure the door is plumb so water doesn’t run toward the opening. If your shower pan has the right slope and your door is installed tight, water stays where it’s supposed to.
That said, frameless enclosures aren’t airtight. A small amount of moisture might escape during a shower, especially if you have strong water pressure or a handheld sprayer. But you shouldn’t see water pooling on your floor or soaking your bath mat. If that’s happening, something’s off with the install.
How do I clean and maintain a glass shower enclosure?
The easiest thing you can do is squeegee the glass after every shower. It takes ten seconds and prevents hard water spots from building up. If you skip that step, you’ll be scrubbing later.
For regular cleaning, a mix of white vinegar and water works well. Spray it on, let it sit for a minute, then wipe it down with a microfiber cloth. Avoid abrasive cleaners or rough sponges—they can scratch the glass or damage the seals.
If you’re dealing with stubborn buildup, a paste of baking soda and water can help. Apply it gently, scrub with a soft brush, and rinse thoroughly. Long Island water can be tough on glass, so staying on top of it makes a big difference. Some homeowners also use a water-repellent treatment on the glass every few months to keep things easier to maintain.
Can you install a shower enclosure if my walls aren't perfectly straight?
Yes. Most walls aren’t perfectly straight, especially in older homes. That’s normal, and it’s something we account for during the templating process.
We measure the actual dimensions of your space—not just the width and height, but also how plumb the walls are and where they’re out of alignment. Then we fabricate the enclosure to fit those real-world conditions. Sometimes that means shimming the hardware or adjusting the glass angle slightly so everything seals properly.
If your walls are significantly out of square, we’ll talk through the options with you. In most cases, we can still install a frameless enclosure that looks clean and functions perfectly. It just takes a little more precision on our end, which is part of what you’re paying for when you hire someone with experience.
How much does a custom shower enclosure cost in Lido Beach?
It depends on the size, the glass thickness, the hardware you choose, and how complex the layout is. A simple frameless door for a standard alcove shower might start around a few thousand dollars. A full custom enclosure with multiple panels, a header, and premium hardware can run significantly more.
We don’t give ballpark estimates over the phone because too many variables affect the final price. The best way to get an accurate number is to have us come out and measure. Then we’ll give you a detailed proposal that breaks down exactly what you’re paying for—no surprises, no hidden fees.
If cost is a concern, we can talk through options that fit your budget without sacrificing quality. We’d rather have an honest conversation up front than sell you something that doesn’t make sense for your situation.
Local Resources
Useful Links
Other Services we provide in Lido Beach
